Main Specifications - SYMA GYRO REMOTE CONTROL SERIES User Manual

Main Specifications

375mm
Drone's Length: 375mm
Drone's Height: 110mm
Battery : 7.4V 1000mAh lithium battery
Rectification Procedures
Problem
1. The drone has entered into
The drone
has no 2. When the power of the remote
response
1. The power of the remote control
The flight
response of
2. There is an interference with
the drone is
not sensitive
The drone is
flying towards
1. The drone is not calibrated
its side in one
direction during
hovering
110mm
Reason
low-voltage protection.
control is weak,the power light
indicator will blink.
is weak.
the same frequency as that of
the remote control.
level to the ground.
375mm
Drone's Width : 375mm
Motor's Model :
1. Charge up the drone.
2. Change the batteries of
the remote control.
1. Change the batteries.
2. Change to a place where there
is no interference with the same
frequency.
1. Re-adjust the calibration until
the drone is level to the ground.
For further details, see No.4 on
Page 9 for details(Level
calibration function).
-15 -
10x20
Ø
Solution