Front U-Frame - Ironman Fitness Gravity 4000 Owner's Manual

ASSEMBLY
Step 8:
8.1 Attach the Nylon Strap (32) to the Strap Lock (34) by inserting the end of the Nylon Strap (32)
up through the bottom of the Strap Lock (34). Loop the Nylon Strap (32) over the Pre-assembled
Loop Strap (33) and down through the Strap Lock (34). Then loop the strap back over itself, and
insert back through the Strap Lock (34), and pull tight to secure. See Diagram above.
33
32
Step 9:
9.1 Attach the Nylon and Loop Straps (32, 33) to the inversion table by hooking the end of the
Nylon Strap (32) to the loop on the back of the Bed Frame (4) as shown. Then hook the other end
of Loop Strap (33) to the other Pre-assembled loop on the Front U-Frame (1) as shown above.
15