Programming Instructions - Digilock NEXT Sola3 Keypad Product Manual

Programming Instructions

Express Register Manager Keys
The Programming Key can quickly program multiple locks to operate with the same Manager Keys.
1
Go to the lock already programmed to operate with the Manager Keys.
Press =` 66 ` .
The LED will fl ash.
3
At each lock to be programmed, insert the Programming Key.
A two-tone beep will be heard and the LED will fl ash once to indicate
successful registration.
*The Programming Key will continue to function in Express Registration mode until it is used to operate a lock.
Product Guide
Key Managed
2
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
4
To end Express Registration mode:*
Go to any programmed lock.
Press then insert the Programming Key.
= `
Keypad
Shared & Assigned Use Functionality
3