Handle Positions - Digilock NEXT Sola3 Keypad Product Manual

Handle Positions

90º
Locked
180º
Locked
Setup
Locks are shipped with factory default settings (only operates by pressing = `). Each lock must be set up to operate with a Programming
Key and Manager Keys.
1
Insert the Programming Key.
A two-tone beep will be heard
and the LED will fl ash.
2
Product Guide
90º Counter-Clockwise
to unlock
180º Counter-Clockwise
to unlock
2
While the LED is fl ashing, insert
one Manager Key at a time.
A two-tone beep will be heard for
each Manager Key programmed.
Keypad
Key Managed
OR
Locked
OR
Locked
3
While the LED is fl ashing, insert
the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Shared & Assigned Use Functionality
90º Clockwise
to unlock
180º Clockwise
to unlock
4
Repeat above steps for each lock
or follow instructions to Express
Register Manager Keys to setup
all locks.