TierTime UP Mini 2 ES User Manual page 21

Print a Model
Make sure printer is connected to computer through USB, Wi-Fi ( go to page 25 for
details about Wi-Fi settings), an ethernet cable, and then loaded a model.
When the UP software is slicing or sending data to the printer progress displayed on
the status bar on top of the software interface do not unplug the USB cable as this will
disrupt the data transfer and result in a print failure. The USB cable can be unplugged
after the data transfer is finished.
Nozzle Offset:
This value is permanently effective regarless nozzle height changed or not.
Set Layer Thickness
Select Infill Type
Select Print Quity/Speed
19