Determine The Alarm Organization; Organization Of System Operation - Siemens FC700A System Planning Manual

24.3

Determine the alarm organization

24.4

Organization of system operation

Siemens Building Technologies
Fire & Security Products
The FC700A fire detection system has up to 64 programmable organization lev-
–
els (AREAS)
A number of "Alarm variants" are possible (can be selected per ZONE)
–
The time countdown memories "V1" and "V2" must be specified individually
–
The time countdown memory "V2" can be defined per ZONE (if required)
–
Various special local functions are provided
–
The alarm organization is programmed individually (via maintenance PC)
–
The place of operation of the fire detection system must be determined from an
organizational point of view
If required a second operating facility must be provided
If operating units are particularly exposed, they must be fitted with a lockable
Plexiglas door (H26T030 + Z3S200)
The type of event and the location are displayed on the operating unit in plain
text
The locations (rooms etc.) are individually defined by means of the "User text"
(via maintenance PC)
If required, an additional event-related instruction, a so-called counter-
measures text, can be allocated
The fire detection system may only be operated by instructed personnel (operat-
ing access is therefore protected by password or key switch)
Details of control terminal FT700A see chapter 12
Alarm concept
57
007836_a_en_--.doc
03.2004