Installation; Package Contents / Scope Of Delivery; Safety And Installation Information; Attaching Theterminal - Siemens TC35 User Manual

Installation

Package contents /
• Package unit:
scope of delivery
• TC35 Terminal
• User guide
Safety and
• The Terminal should be installed and set
installation
• Connect a fast 1.25A fuse to the incoming
information
• If a power supply unit is used to supply the
• The maximum permissible connection
• Your supplier will be pleased to provide
Attaching
The TC35 Terminal can be attached with two
screws. Use screws approx.50 mm long
theTerminal
and Ø 3mm. The TC35 Terminal can be
attached to a top-hat rail using an additional
fixture (see the following page).
TC35 Terminal
and user guide L36880-N8600-A100
S30880-S8600-A10
A31008-H8600-A1-*-7619
up only by qualified personnel.
line for the positive supply voltage to
protect the Terminal.
TC35 Terminal, it must meet the demands
placed on SELV circuits in accordance with
EN60950. When using batteries and
accumulators, adhere to the relevant
regulations.
length between the TC35 Terminal and
the supply source is 3m.
you with a detailed technical description
and technical support for the SIEMENS
TC35 Terminal.
9