4
Installation and Commissioning
4.1
Reference to Installation
The devices are permitted only for operation within enclosed housings or
cabinets and places of installation are to be accessible only for qualified
personnel.
The device is clipped on a 35 mm top-hat rail (according to EN50022).
The installation location should be free of vibrations. The admissible
temperature (operation or functional temperature) is to be observed (see
technical data).
Disregard of the temperature range required for proper function may cause
malfunction, failure or destruction of the device.
4.2
Connection of the device
The chapter Connection describes how to connect data and power supply cables for
a safe operation. For the electrical connection, the regulations on the raise of heavy-
current installations are to be observed.
7XV5450-0BA00
Warning
When operating electrical devices, certain parts are
necessarily under dangerous voltage. Therefore,
disregard of the operating notes may cause servere
bodily injury or property damage. Installation and
electrical connection of the device should be performed
by adequately qualified personnel only. In particular, all
warnings must be strictly observed.
Warning
Do not look directly in the FO-transmitter diode Tx.
Mini-Star coupler
C53000-B1140-C595-1
Page 23 of 28