Table of Contents
Advertisement
5
Installation and Commissioning
5.1
Reference to Installation
•
The devices are permitted only for operation within enclosed
housings or cabinets and places of installation are to be accessible
only for qualified personnel.
•
The device is clipped on a 35 mm top-hat rail (according to
EN50022).
•
The installation location should be free of vibrations. The admissible
temperature (operation or functional temperature) is to be observed
(see technical data).
•
Disregard of the temperature range required for proper function may
cause malfunction, failure or destruction of the device.
5.2
Connection
The chapter ´Connection´ decribe how to connect data- and power
supply cables for a save operation. For the electrical connection the
regulations on the raise of heavy-current installations are to be observed.
Page 22 of 28
Warning
When operating electrical devices, certain parts
are necessarily under dangerous voltage.
Therefore, disregard of the operating notes may
cause servere bodily injury or property damage.
Installation and electrical connection of the
device should be performed by adequately
qualified personnel only. In particular, all
warnings must be strictly observed.
Warning
Do not look directly in the FO-transmitter diode
Tx if you wear optical aid (glasses, contact lens)
Mini-Starcoupler
19.10.2006
Advertisement
Table of Contents
