Samsung OfficeServ ITP-5012L User Manual page 44

GETTING STARTED
5.
The upper menu is displayed again.
6.
Select [2. IP] to display the current
IP address of the IP phone.
No address is displayed if an IP address
is not set.
Use the dial buttons [0]~[9] and [
enter a new IP address, and press the [Enter] button.
Be careful not to enter a duplicate
"
IP address since the data network will not
support duplicated IP addresses.
7.
Select [3. Netmask] to display the current
Netmask address of the IP phone.
To change the Netmask address,
enter a new address and press
the [Enter] button.
8.
Select [4. Gateway] to display the current
Gateway address of the IP phone.
To change the Gateway address,
enter a new address and press
the [Enter] button.
Page 28
] to
© SAMSUNG Electronics Co., Ltd.