Getting Started; Entering The Environment Setup Mode - Samsung OfficeServ ITP-5012L User Manual

GETTING STARTED

This chapter describes the procedure for setting the user environment after installing and
booting the ITP-5012L IP phone.

1. Entering the Environment Setup Mode

When the IP phone is first installed or the system settings have changed, you must set the data
network environment settings through the environment setup menu. This menu also allows you to
designate the TFTP server for upgrading the IP phones programs.
1.
Connect the power adaptor while pressing
the [Menu] button.
2.
The environment setup menu appears
on the LCD screen.
Press the
to move to between the menus, and press
the [Enter] button to select.
Setup Menu Structure
Setting items are built in the below structure.
1. Information
2. Network
3. Load & Upgrade
4. System
5. Server
6. Exit
© SAMSUNG Electronics Co., Ltd.
[ ]/[ ]
direction button
1. Version
2. Network
3. Load Option
4. MAC address
1. Mode
2. IP
3. Netmask
4. Gateway
1. Load Option
2. Upgrade Program
3. Upgrade Bootrom
4. Format
1. Password(* Not Used)
1. Server IP
2. ID
3. Password
Manual IP
1. Mode
DHCP PPPoE
1. Mode
2. ID
3. Password
Page 25