9. Types of Signal Tone
The types of signal tone used in this telephone system are described in the following table.
Signal
Tone Name
Dial tone
Ring back
tone
Busy tone
Transfer tone
Confirmation
tone
* The Signal Interval may vary for each
10. Changing the Dial Mode
The OfficeServ system allows you to dial to the
local telephone network using either pulse
(mechanical) or tone dialling modes.
To change from pulse(mechanical) dial mode to
tone dial mode, press the [#] button while dialling
an external number. Then, every number pressed
after the [#] button will be transmitted in tone
mode(electronic mode).
© SAMSUNG Electronics Co., Ltd.
Usages
A steady tone that indicates
you can begin dialling.
Indicates the station you dialled
is ringing.
Indicates the station you dialled
is busy.
Indicates your call is being held
and you can dial another
station.
Very short beeps that indicate
you have correctly set or
cancelled a system feature.
country.
THINGS YOU SHOULD KNOW
Signal Interval
Page 23