Description; G1 Bluetooth Audio Capabilities; G1 Bluetooth Gas Detection Integration - MSA G1 SCBA Instruction Manual

2

Description

2.1

G1 Bluetooth Audio Capabilities

The MSA G1 SCBA can be wirelessly paired and connected to a Motorola APX radio to provide clear
communication across the Motorola portable radio network. The system uses Bluetooth wireless technology
to share the audio information to and from the MSA G1 SCBA. The G1 SCBA filters out background noise
to provide the Motorola radio the SCBA user's voice only. This means that even when the PASS alarm and/
or the low pressure alarms are active, these alarm sounds are eliminated from the voice communication
sent across the network. This ensures all critical information is heard loud and clear.
Key Features
• Bluetooth wireless pairing between G1 SCBA and Motorola APX series radios
• Removal of all background noise by the G1 SCBA and sent to the Motorola APX radio
• Automatic connection and disconnection based on the breathing and shutoff of the G1 regulator
• Simple pairing of the Motorola APX radio to the MSA G1 SCBA
• Possible to pair a Motorola radio and gas detector simultaneously
Compatible Radios
• APX 5000 Series
• APX 6000 Series
• APX 7000 Series
• APX 8000 Series
2.2

G1 Bluetooth Gas Detection Integration

The MSA G1 SCBA with Long Range Radio can be wirelessly paired and connected to an MSA Altair 4XR
or 5X to provide gas detection alarms and real-time readings through the A2 accountability software. The
system uses Bluetooth wireless technology to share the gas detector readings with the G1 SCBA which
then in turn transmits the data back to the MSA accountability software.
Key Features
• Bluetooth wireless pairing between G1 SCBA and selected MSA portable gas detectors
• Real time gas data viewing on the accountability software
• Automatic connection on power up after initial pairing
• Possible to pair a Motorola radio and gas detector simultaneously
Compatible Gas Detectors
• Altair 4XR
• Altair 5X Bluetooth (Not compatible with MSA IR sensors)
• Altair 5X PID/IR (Not compatible with PID/IR sensors unless SW version is 5.08 or higher)
G1 SCBA
Description
US
5