Troubleshooting; Troubleshooting Bluetooth Enabled Radios - MSA G1 SCBA Instruction Manual

6

Troubleshooting

6.1

Troubleshooting Bluetooth Enabled Radios

The SCBA will not connect to the portable radio unless the end user is breathing through the regulator.
Problem/Issue Diagnosis
Incoming and/or
outcoming audio is not The Bluetooth icon is
going through the G1. visible on the
The radio is acting as a Motorola radio.
stand-alone radio.
The Bluetooth icon is
not visible on the
Motorola radio.
Possible Solution
Power the portable radio on and
off to reset the auto connect.
If powering the radio on and off
does not result in a successful
connection, remove the battery
from the G1 SCBA or scan a
pairing tag to
Reset Bonding
clear all pairing history from the
G1 SCBA.
Clear the pairing history from the
Motorola radio by long pressing
the side bottom (2-Dot) button.
Once both devices have had the
pairing history cleared, re-pair
them per the instructions in the
user manual.
Enable Bluetooth on the radio by
pressing the bottom side button
(2-dot) on the Motorola radio
Power the portable radio on and
off to reset the auto connect.
If powering the radio on and off
does not result in a successful
connection, remove the battery
from the G1 SCBA or scan a
pairing tag to
Reset Bonding
clear all pairing history from the
G1 SCBA.
Clear the pairing history from the
Motorola radio by long pressing
the side bottom (2-Dot) button.
Once both devices have had the
pairing history cleared, re-pair
them per the instructions in the
user manual.
G1 SCBA
Troubleshooting
Expected Result
The radio will automati-
cally connect to the G1
and the radio will emit an
audible indication of a
successful connection
The G1 SCBA and radio
will now connect and all
audio will function as
expected.
The Bluetooth icon will
become visible on the
radio, and the radio will
automatically connect to
the G1 and emit an
audible indication of a
successful connection.
US
17