Troubleshooting Altair Gas Detectors - MSA G1 SCBA Instruction Manual

Problem/Issue Diagnosis
All pairing informa-
tion is cleared from
Bluetooth pairing infor-
the SCBA whenever
mation is lost from the
the battery is
SCBA.
removed from the
SCBA.
6.2

Troubleshooting Altair Gas Detectors

Problem/Issue
The MSA Altair gas
detector data is not
displaying in the A2
application.
The MSA Altair gas
detector will not pair with
the G1 SCBA
Possible Solution
G1 SCBA with SW versions 3.0
or higher can be configured so
that pairing information is
retained across battery
removals. To configure the
SCBA to do this a Bluetooth
Pairing Save tag must be
created in A2 and the tag must
be scanned to the SCBA.
Diagnosis Possible Solution
The SCBA that has
Upgrade the SCBA to a telem-
been paired to the
etry model or pair the MSA gas
MSA gas detector is
detector to an SCBA already
not equipped with
equipped with telemetry.
telemetry.
The MSA Gas
Detector is a model
that is not equipped
with Bluetooth. Only Utilize an MSA Altair 4XR or
the MSA Altair 4XR Altair 5X with Bluetooth gas
and Altair 5X with detector.
Bluetooth are
compatible with the
G1 SCBA.
The G1 SCBA was
powered on 10
minutes or more
Power cycle the G1 SCBA.
before the MSA gas
detector was turned
on.
G1 SCBA
Troubleshooting
Expected Result
Bluetooth pairing infor-
mation will no longer be
cleared on every battery
removal.
Expected Result
All MSA Altair gas
detector will be
displayed as expected in
A2.
Full Bluetooth connec-
tivity between the MSA
Altair and the G1 SCBA
Full Bluetooth connec-
tivity between the MSA
Altair gas detector and
the G1 SCBA.
US
19