Conducting calls – the basic functions
Step-by-Step
2
Activating/deactivating the handset
a
Press the On-hook key until the activation or deactiva-
tion is confirmed by a crescendo tone sequence.
If your preferred language for the display texts is not
set, you can set this yourself (
Displaying the connection quality
The strength of the incoming signal is displayed by the
"receive field strength" icon in on or message status:
|
Ò
Ñ
Ð
The radio range is different indoors and outdoors
(
page 93). Please consult your system administrator
in the event of range problems.
First seize the line, then dial
c
u
or
Press the Talk or Speakerphone key.
o
Enter the required phone number. The user will be
called.
Typing errors cannot be corrected. If you make a typing
error: press the On-hook key.
p
The user answers. Conduct the call.
Note:
•
The handset can only be fully switched off
when removed from the charging shell.
•
When the handset is placed in the charging
shell it goes to idle status and shows the idle
display.
No receive field strength
Low receive field strength
50% receive field strength
100% receive field strength
page 16).