Entrance Telephone - Siemens 3000 V3.0 Operating Manual

Step-by-Step
> <
Open door?
> <
Service?
> <
* 61=Open door?

Entrance telephone

If the service engineer has set up an entrance tele-
phone, you can speak to the door intercom and activate
the door opener from your handset.
If you are authorised to release a door, then a user can
open the door by entering a 5-digit code (e.g. by means
of a DTMF transmitter or installed keypads).
Some of the functions described below can also be
called directly by entering the relevant code
( page 88).
Talking to a visitor by means of the door opener
equipment
Your handset rings.
either:
c
Press the Talk key within 30 seconds. You are connect-
ed immediately to the door opener.
or:
c
If more than 30 seconds have passed: Press the Talk
key.
o
Enter the internal phone number for the door opener.
You are connected to the door opener.
Using the handset to open the door opener during
a call
[
Select and confirm the menu item.
Using the handset to open the door opener without
holding a conversation
c
Press the Talk key.
Call the system menu.
Menu
[
Select and confirm the menu item.
[
Select and confirm the menu item.
o
Enter the internal phone number for the door opener.
The door is opened.
a
Press the On-hook key to end the process.
Conducting calls – enhanced functions
43