Cleaning The Handset; Technical Data - Siemens 3000 V3.0 Operating Manual

Error
The following, for ex-
ample, appears:
Base 1
Outgoing and incoming
calls and activation/de-
activation are not possi-
ble.

Cleaning the handset

To clean the handset and the charging shell, simply wipe them with a damp
or antistatic cloth. Never use a dry cloth.
Do not use abrasive cleaning agents.

Technical data

Communication system
Standards
Number of channels
Radio frequency range
Duplex operation
Channel configuration
Bit rate
Modulation
Voice encoding
Range
Handsets
EU guidelines
Maximum noise level
according to TBR10, An-
nex D
Operating times with
fully charged battery
Possible cause
Handset is blocked.
DECT in accordance with ETSI TBR 6/10/22
120 duplex channels
1.88 GHz to 1.90 GHz
Time duplex with a 10 ms frame length each
1728 kHz
1152 kbit/s
GFSK
32 kbit/s (ADPCM)
Outdoors approx. 300 m
Indoors approx. 50 m
89/336/EC "Electromagnetic Compatibility"
73/23/EC "Electrical apparatus for use within
specific voltage parameters"
118 dB (A)
page 15
Appendix
Remedy
Remove the battery
from the handset and
then re-insert it. Pro-
cede as when loading
batteries for first time.
( page 14).
93