Table of Contents
Advertisement
Setup Screen 2
This screen allows the user to set a Gel Timer and Pres-
sure Preset.
Gel Timer: When enabled, the gel timer prevents mate-
rial from curing in the mixer. The user can select a
sequence to run, as well as the amount of idle time the
machine can wait between dispenses. If the system
does not dispense again before the set time runs out,
the gel timer will dispense the preset sequence.
Enable: Check this box to enable the gel timer.
Idle Period: This is the amount of time the unit will
remain idle before beginning to dispense.
Alarm: This is the amount of time the alarm will go off
before dispensing begins.
Repeat Until: The selected sequence will be repeated
until the specified amount of material has been purged.
Pressure Preset: The pressure preset allows the user to
select the sequence that will run when the prime icon
is pressed on the home screen. The user can
either select the Active Sequence, which is shown on
the home screen, or one of the other sequences listed in
the drop down menu for the pressure preset.
Repeat Until: The selected sequence will be repeated
until the specified amount of material is reached during
priming.
3A6165A
Advanced Screen 1
This screen allows the user to change the language,
date, and time shown on the ADM. The user can also
set up a password and change the screen saver here.
Advanced Screen 2
This screen allows the user to view and upgrade soft-
ware installed on the system. Clicking the
will open a new screen that shows what software is cur-
rently installed.
ADM Screen Overview
icon
37
Advertisement
Table of Contents
