Restoring The Base Station To Factory Settings; Activating/Deactivating Music On Hold; Activating/Deactivating Repeater Mode; Repeater Mode - Siemens Gigaset S450 IP User Manual

Base station settings
Restoring the base station to
factory settings
Resetting the base station via the
menu
Each individual setting is reset, in particu-
lar:
u
VoIP settings such as VoIP provider and
account data and DTMF settings
(page 68, page 77, page 86)
u
Settings for the local network (page 69,
page 75)
u
Default connection (page 67)
u
The names of the handsets (page 58)
u
SMS settings (e.g. SMS centres,
page 36)
u
Settings for the connection to the PABX
(page 71)
SMS lists and calls list are deleted.
The date and time and the system PIN are
retained. The handsets are still registered.
¢ ¢
v Ð
Settings
~
Enter the system PIN and press
.
§OK§
Press the display key to
§Yes§
confirm.
Resetting the base station using a key
on the base station
As with resetting the base station via the
menu, all individual settings are reset. The
system PIN will also be reset to "0000" and
all handsets registered above and
beyond the delivery scope are deregis-
tered.
Please note:
For how to reregister the handsets after reset-
ting, if necessary, see page 56.
¤
Remove the cable connections from
the base station to the router (page 11)
and fixed network (page 11).
66
¢
Base Base Reset
¤
Remove the base station mains unit
from the socket (page 11).
¤
Press and hold the registration/paging
key (page 1).
¤
Plug the mains unit back into the power
socket.
¤
Press and hold the registration/paging
key (at least 2 sec.).
¤
Release the registration/paging key.
The base station has now been reset.
Activating/deactivating music
on hold
¢ ¢
v Ð
Settings
Music on hold
Select and press
or deactivate music on hold
(½ = on).
Activating/deactivating

repeater mode

With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls being
made via the base station at that time.
Precondition: a repeater is registered
with the base station.
¢ ¢
v Ð
Settings
¢
Add. Features
Repeater Mode
Select and press
Press the display key to con-
§Yes§
firm the security prompt.
Base
to activate
§OK§
Base
(½ = on).
§OK§