Restoring The Handset Default; Settings; Base Station Settings; Protecting Against Unauthorised Access - Siemens Gigaset S450 IP User Manual

Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
or
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.

Restoring the handset default

settings

Each individual handset setting is reset, in
particular the language, display, volume,
ringer and alarm clock settings (see from
page 61). The last number redial list is
cleared.
¢ ¢
v Ð
Handset
Press the display key.
§Yes§
You can cancel the restoring
process by pressing a or the
display key
a
Press and hold (idle status).
¢
Reset Handset
.
§No§

Base station settings

The base station settings are carried out
using a registered Gigaset S45 handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN is one of the items you
must enter when registering and deregis-
tering a handset, changing the VoIP set-
tings or restoring to factory settings.
Changing the system PIN
You will have to enter the system PIN e.g.
when you register a handset with the base
station, change the VoIP settings or start
the Web configurator.
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
system PIN known only to yourself.
¢ ¢
v Ð
Settings
~
Enter current system PIN and
press
§OK§
~
Enter new system PIN.
s
Scroll to the
~
Now re-enter the new system
PIN and press
For security reasons, " **** " is displayed
instead of the system PIN.
a
Press and hold (idle status).
Base station settings
¢
Base System PIN
.
line.
Re-enter PIN:
.
§OK§
65