Making Cost-Effective Calls; Displaying The Call Duration; Linking Call-By-Call Numbers With A Number - Siemens Gigaset S450 IP User Manual

Managing entries in the calls list
After pressing the display key
can select more functions with q:
Copy to Directory
Copying a displayed number to the
directory.
Information
If a URI was received and stored for a
VoIP call, this will be shown. The URI is
dialled if you press the talk key c.
The URI is not entered on the last
number redial list.
See also the following section 'Display-
ing CNIP information'.
Delete List
Delete complete list.
When you leave the calls list all entries are
set to the status 'old', i.e. the next time you
call the list up they will no longer be
shown in bold.
Displaying CNIP information
If you have CNIP, you can display the name
and town that is registered with your net-
work provider for this number.
You have selected a list entry.
Open menu.
§Options§
Information Select and press
If the name and town are not shown, it
means that the caller has not requested
Calling Line Identification or that Calling
Line Identification has been withheld.
Press to return to the list.
§OK§
Selecting from the calls list
¢
f
Calls List: (2)
q
Select entry.
c
Briefly press/press and hold
the talk key. The number is
dialled using the selected con-
nection type (page 20).
you
§Options§
.
§OK§

Making cost-effective calls

Making cost-effective calls
Using the Internet (VoIP) is the preferred
cost-effective way of making calls. If you
make calls via the fixed network, select a
network provider who offers very low call
charges (call-by-call) or have the call
duration displayed on your handset after
the call. You can manage call-by-call num-
bers in the call-by-call list

Displaying the call duration

The duration of a call is displayed
u
during the conversation,
u
until about three seconds after the call
has ended if you do not replace the
handset in the charging cradle.
Please note:
The actual duration of the call can vary from
that shown by a few seconds.
Linking call-by-call numbers
with a number
You can insert the dialling code of a
network provider ahead of the number
('linking').
C
Open call-by-call list.
s
Select entry (call-by-call
number).
Press the display key.
§Options§
Display Number
Select and press
~ / s
Enter number or dial number
from the directory (page 32).
c
Press the talk key. Both num-
bers are dialled.
.
§OK§
35