Activating/Deactivating Display Of Voip Status Messages; Check The Base Station Mac Address - Siemens Gigaset S450 IP User Manual

Making VoIP settings
IP Address:
For
IP Address Type
The IP address that is currently assigned
to the base station will be displayed. It
cannot be amended.
For IP Address Type
Enter the IP address that is to be
assigned to the base station (overwrit-
ing the current settings).
192.168.2.2 has been preset.
For the IP address see also page 115.
Subnet Mask:
For
IP Address Type
The subnet mask that is currently
assigned to the base station will be dis-
played. It cannot be amended.
For IP Address Type
Enter the IP address that is to be
assigned to the base station (overwrit-
ing the current settings).
The default setting is 255.255.255.0
For the subnet mask see also page 118.
DNS Server:
For IP Address Type
Enter the IP address for the preferred
DNS server. The DNS server (Domain
Name System) converts the symbolic
name of a server (DNS name) into the
public IP address for the server when
the connection is made.
You can specify your router's IP address
here. The router forwards phone
address requests to its DNS server.
192.168.2.1 has been preset.
Default Gateway:
For
IP Address Type
Enter the IP address for the standard
gateway, by means of which the local
network is connected with the Internet.
This is generally the local (private)
IP address for your router (e.g.
192.168.2.1). Your phone requires this
information to be able to access the
Internet.
192.168.2.1 has been preset.
70
= Dynamic:
= Static:
= Dynamic:
= Static:
= Static:
= Static:
¤
Click to save the settings.
§Save§
Please note:
You can find notes on the IP address and the
subnet mask on page 76 and in the glossary on
page 115/page 118.
Activating/deactivating display
of VoIP status messages
If the function is activated, a VoIP status
code for your service provider is displayed.
Activate the function e.g. if you have prob-
lems with VoIP connections. You will
receive a provider-specific status code,
which supports the service when the
problem is analysed. You will find a table
with the possible status screens in the
appendix (page 97).
¢ ¢
v Ð
Settings
~
Enter the system PIN and press
.
§OK§
Show Stat. on HS
Select and press
Please note:
For how to make the setting on the Web con-
figurator, see page 93.
Check the base station
MAC address
Depending on your network configura-
tion, you may have to enter your base sta-
tion MAC address, for example, into your
router's access control list. You can check
your base station MAC address:
v 5 5 O 2 Q
The base station MAC address is displayed.
a
Press and hold (idle status).
¢
Telephony VoIP
(½ = on).
§OK§