Wiring The Fiber Module - Allen-Bradley ControlNet 1786-RPFM Installation Instructions Manual

8
ControlNet Modular Repeater Medium-distance Fiber Module

Wiring The Fiber Module

If only one channel is wired, you can use Channel 1 or Channel 2.
To wire the module for Channel 1:
1. Connect to Receive ST.
a. Align the knob of the ST cable connector with the groove of the
ST module connector, and insert the connector into
b. Twist the Receive ST connector until the bayonet lug is locked
into place.
2. To connect to Transmit ST into
1786-5.11 — February 1998
Channel 1
Channel 2
A
B
, repeat Step 1.
A
.
B
(transmit)
(receive)
30044–M