ADRF FiRe-78-4 Installation And Operating Manual page 10

Antennas must be installed in accordance with FCC 90.635. With 17 dBi gain antennas the height of
the antenna above average terrain (HAAT) must not exceed 85 m. For different gain antennas refer
to the relevant rules.
This is NOT a CONSUMER device. It is designed for installation by an installer approved by
an ISED licensee. You MUST have an ISED LICENCE or the express consent of an ISED
licensee to operate this device.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionneravec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur
par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention desautres utilisateurs,
il faut choisir le type d'antenne et son gain de sorte que la puissance isotroperayonnée quivalente
(p.i.r.e.) ne dépassepas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Advanced RF Technologies, Inc.
Part 90.635 requirement
WARRANTY
FCC Part 15.21
RSS-GEN, Sec. 7.1.2– (transmitters)
10