Adjustments; Workpiece Supports And Stop Plates; Rail Extensions; Collapsing The Stand For Transport - Delta 36-267 Instruction Manual

WORKPIECE SUPPORTS AND
STOP PLATES
The workpiece supports hold the workpiece level with the stop
plates, preventing it from moving side to side. To raise or lower the
1.
Loosen the support lock knob (A).
2.
Position the supports so they are level and at the
desired height and re-tighten the lock knob.
To position the stop plate on the workpiece supports:
1.
Loosen the stop plate lock knob (B).
2.
Position the stop plate at the desired height and
re-tighten the lock knob.

RAIL EXTENSIONS

The DELTA 36-267 Miter Saw Stand features left and right rail
extensions to accomodate longer work pieces. To extend the right or
left extensions:
1.
Depress the rail lock (A) and pull the rail out to
the desired length.
2.
Release the lock.
COLLAPSING THE STAND FOR
TRANSPORT
The stand folds down for easy transport and can be collapsed
and moved with the saw mounted. To fold the stand for
transport:
1.
Ensure the saw is unplugged and cord wrapped and the
mounting brackets are secured on the rails and locked down.
2.
Grasping the handle (A) from underneath, depress the foo
pedal lock (B) and slowly lift up on the handle.
3.
Continue to raise the handle, guiding the stand forward and
up, until the support legs click into place.
4.
You can now lower the folded stand to a comfortable position
for transport.
5.
To redeploy the stand and saw, grasp the handle, depress
the foot pedal and slowly guide the handle end of the stand
down and back until you hear the support legs click into
place. Make sure the lock has clicked into place before using
it for any cutting operation.
MOUNTING BRACKET CLAMPING
PRESSURE
Adjust mounting bracket pressure as shown.

ADJUSTMENTS

t
9
B
A
A
A
B