Delta RS4000 Assembly Instructions

Single Bike
Wall Mount Rack
Assembly instructions
Locate stud beneath wallboard and mark position
1
of desired height to hang bike.
Use back plate to mark positions for drilling pilot
2
holes for mounting screws. Drill holes.
IMPORTANT SAFETY NOTE
Beware of drilling into electrical
wire or pipes within wall!
Use spirit level to ensure plate is
horizontal when drilling holes for
mounting screws.
(for Model RS4007 (with Tire Tray)
3 Hang bike on hook to determine lower plate height.
Position bottom plate in line with top plate,
4
remove backing tape and adhere to wall.
Tools Required
Phillips Head
Screwdriver
Hand Drill 1/8"
(3mm)
Spirit Level
Way of locating studs within the wall
(see hardware store for advice)
WARNING
Do not exceed maximum total weight limit of 18kg/40lbs. Incorrect wall mounting could result in
items falling and injury to persons. Avoid mounting in a position where personal injury
could result from walking into protruding rack. Do not allow children to play or hang from Rack.
STUD
CENTERLINE
WALLBOARD
STUD