Delta 36-267 Instruction Manual page 5

PACKAGE CONTENTS DESCRIPTION (QTY)
1. Miter saw stand (1)
2. Handle (1)
3. Mounting bracket (2)
4. Workpiece support w/stop plate (2)
5. Vertical stabilizer (1)
6. Wheel (2)
7. Rubber Feet (2 Small and 2 Large)
8. Knob – Large (2)
HARDWARE DESCRIPTION (QTY)
• M6 Hex Locknut (2)
• M8 Locknut (2)
• M10 Locknut (2)
• M12 Hex Locknut (2)
• M6 x 50mm Slot Pan-Head
Screw (2)
• M8 x 20mm Self-Tapping
Screw (2)
• M10 X 55mm Hex Screw (2)
• M12 x 110mm Hex Head
Screw (2)
• M8 (ID) x 25mm (OD) X
3mm (thick) Flat Washer (2)
UNPACKING
• M12 (ID) x 20mm (OD) x
2mm (thick) Flat Washer (2)
• M13 (ID) x 28mm (OD) x
2.8mm (thick) Flat Washer
(2)
• Wheel shaft M8*93L Hex
shoulder screw (2)
• M8 x 55mm hex bolt (4)
• M8 washer (4)
• M8 hex nut (4)
NOTE: All hardware uses
right-handed threads.
1
3
5
7
5
2
6
8
4