Vertiv Alber Cellcorder CRT-400 User Manual page 79

Setting Up the CRT
The message "Checking for Bluetooth Option" is displayed. Please Wait appears.
Initially, the message "No devices paired." indicates no Bluetooth device is stored in memory.
Select New/F1. Then F1-Headset.
Note: Use the corresponding F key to select the desired device type.
The message Configuring Bluetooth appears.
The next message on the LCD window prompts you to Turn on the device and place it in discovery
mode. Place the Bluetooth device in discovery mode according to the devices manufacturer's directions.
Select Continue/F2.
When searching devices is complete, the Cellcorder lists all discovered devices.
590-2099-501A/SL-29414/4200-070
13- 11 Revision 4