Vertiv Alber Cellcorder CRT-400 User Manual page 129

Utilizing CRT-400 Service Menu
File transfer in progress appears and the frame number counts down.
When the upgrade is successful. System is running Version nn.nnnnn appears, press Continue/F3.
To Upgrade Firmware Using the IR Port W/BAS and PC
Download the .UPG file from the Vertiv Web site, www.vertivco.com or an Vertiv CD to Program
Files/Alber/Alber Battery Analysis, then use Windows Explorer to copy the file to the USB flash hard
drive.
With Cellcorder powered off, insert the USB flash hard drive into the Cellcorder. Hold ESC and press
Power to start in firmware upgrade mode. At the message System is ready to clear Flash memory for
new program, press Continue/F2.
At System ready to receive upgrade file. Select file transfer method, press Infrared/F3.
The CRT LCD lets you know that it is being prepared for the Memory Upgrade. File transfer in progress
appears.
590-2099-501A/SL-29414/4200-070 18- 6 Revision 4