Vertiv Alber Cellcorder CRT-400 User Manual page 26

Product Overview
The F1, F2, F3 and F4 buttons select the functions that display on the LCD Display directly above. These
buttons also have the following options.
Note: Press Shift on the keypad, then release SHIFT, then press F1, F2, F3 and F4 to select the orange
text on any key.
Button
SHIFT F1
SHIFT F2
SHIFT F3
SHIFT F4
F1/F2 Yes/No - When possible, F1 is used for Yes and F2 is used for No.
F3/F4 Back/ Cancel - When possible, F3 is used for Back and F4 is used for Cancel.
Power - Press and release Power to power on the CRT. Press and hold Power to power off. The CRT–400
is powered by a lithium ion rechargeable battery.
Enter/Arrows functions - Enter plus arrow keys. Press Enter after typing data, such as password. Press
Up, Down, Left or Right arrows to navigate LCD windows.
Test - The Test key initiates the test sequence. Press and hold for approximately ½ second to initiate cell
testing.
ESC/Escape - press the ESC key to exit certain LCD windows. Hold and press Power + ESC to start in
firmware upgrade mode.
590-2099-501A/SL-29414/4200-070
Function
Print
Send
Save
Site
3- 13
Description
Sends data to the printer via IR/Bluetooth.
Sends data to the computer via IR/Bluetooth.
Saves data to the USB flash hard drive.
Displays the site selected.
Revision 4