Vertiv Alber Cellcorder CRT-400 User Manual page 41

Getting Ready to Test Batteries with the CRT-400
At the main menu, select Load Data/F3 to obtain this LCD window:
Note: Using arrows allow access to the specifics of the site, such as LOCation, BATtery, etc.
Press F1/SITE SETUP To load the site template
When the USB flash hard drive has no sites stored, then the New Site LCD window appears.
Highlight LOCation
To begin, make sure LOC is highlighted by using the arrow keys.
Type the location name.
Press F1/Change
Press Save/F2. Site ### of ### appears. The first set of ### is the new site number created. The second
set of ### is the number of sites on the USB flash hard drive or sites entered. For this first case, the
message should read, "Site 001 of 001."
Highlight Battery
Press the down arrow key to highlight the next information item, BAT.
•
Press F1/Change
•
Press Save/F2
•
Highlight STG For String Name
590-2099-501A/SL-29414/4200-070 5- 6 Revision 4