Vertiv Alber Cellcorder CRT-400 User Manual page 19

Product Overview
Part Number
CRT carrying case
3800–028
Battery Analysis
System BAS and
Previewer
software and
User's Guides
2027–014
4200–002 BAS
4200–040
Preview
2 Wire Cord W/
IEC–320 Plug
6003–015 = US,
6003–016 = Euro,
6003–017 = UK
Spike
Probes
1101 Series
Printer
2025–132L
Thermal Printer
Paper
2025–126
590-2099-501A/SL-29414/4200-070
Part
3- 6
Description
A convenient carrying case for Cellcorder
and its accessories.
Software downloads, updates and User's
Guides can be downloaded from the
Website at: www.vertivco.com
Power for the charger
module part number
KIT-4000–034, to charge the
CRT's battery.
The Cellcorder Spike Probes are for use
with hard–to–access battery terminal
posts. Using these probes, it is possible
to measure the internal resistance of a
cell or module and take float voltage
readings. Check www.vertivco.com
the latest models.
Printer with IrDA interface
Note: When using the IrDA interface
port with a CRT printer, the printer must
be set up in "IRDA Physical layer" mode
to communicate with an Vertiv CRT-400.
for
Revision 4