Vertiv Alber Cellcorder CRT-400 User Manual page 67

The Hydrometer and the Data Logger
Cell Data/F2
Highlight a .CDF file name by using the arrow keys and press Select/F1.
A warning displays if data exists in the CRT's memory. Press F3 to Continue or F1 to Cancel.
If F3 is pressed to Continue, the CRT reads the USB and loads the cell information. The main menu
appears once the file has been selected or if Cancel/F1 is pressed.
Now, select Test Mode/F1.
Select SG/Temperature/F3, then press Import/F2.
Use The Hydrometer's Data Logger to Transfer Data to your Previewer
1. Turn the data logger on.
2. On the data logger, press SEL to select the channel (string) A through H from which data will be
transferred to your previewer. The module LEDs indicate memory status as follows:
•
Fast - If the LED next to A through H is flashing fast, that channel has data and is selected.
•
Steady - If the LED is on, that channel has data but is not selected.
590-2099-501A/SL-29414/4200-070
12- 5 Revision 4