Vertiv Alber Cellcorder CRT-400 User Manual page 65

The Hydrometer and the Data Logger
Note: Both the CRT and Hydrometer must be set to Fahrenheit °F or both the CRT and Hydrometer must
be set to Celsius °C.
Press F2/TEMP
Change to Fahrenheit °F or Celsius °C by depressing F3–C/F. The temperature will need to be entered for
the High Threshold by using the arrow keys. Then press F2/Accept.
Threshold Temperatures
The temperature will need to be entered for the Low Threshold by using the arrow keys. Then press
F2/Accept.
Specific Gravity Thresholds High
Press F1/Specific Gravity. The specific gravity threshold will need to be entered for High by using the
arrow keys. Then press F2/Accept.
Specific Gravity Thresholds Low
Press F1/Specific Gravity. The specific gravity threshold will need to be entered for Low by using the
arrow keys. Then press F2/Accept.
Once the highs and lows are entered, press F4/Back.
The up arrow key can access the other thresholds if necessary.
590-2099-501A/SL-29414/4200-070
12- 3 Revision 4