Advertisement
6
Phoenix 1212 Engraver S5 Installation Guide
1.2
General Electrical and Facility Requirements
Machine Model
Phoenix 1212
Optional Equipment
Engraving Vacuum Chip Removal System
NOTE: In addition to the above requirements, a standard outlet is required for the
computer.
2
Vision Software Installation
Insert the Vision USB dongle into the USB port on the computer. Navigate to the Devices and Drives
area on your PC. Double click on the Vision icon to open the files on the USB dongle.
Select the Start or Start.exe file to begin.
Click on the Install Vision Software button.
Requirements
One 110 VAC 15 Amp or One
220 VAC 10 Amp Single Phase
One 110 VAC 15 Amp
© 2018 Vision Engraving & Routing Systems
Advertisement
