General Electrical And Facility Requirements - Vision 5 Series Installation Manual

6 Vision 1612, 1624, 2424 and 2448 Series 5 Installation Guide
1.3

General Electrical and Facility Requirements

Machine Model
Vision 1612, 1624, 2424 or 2448
Optional Equipment
Engraving Chip Removal System
Optional Equipment Requiring
Compressed Air Supply
UNIST Misting System
NSK 50,000 RPM Spindle
NOTE: In addition to the above requirements, a standard outlet is required for the computer.
Requirements
One 110 VAC 15 Amp
OR One 220 VAC 10 Amp Single Phase
Required in addition to the machine power above:
One 110 VAC 15 Amp OR One 220 VAC 10 Amp
Required in addition to the machine power above:
Clean Dry Compressed Air Supply 60 - 90 PSI
One 110 VAC 15 Amp OR One 220 VAC 10 Amp Single
Phase AND Clean Dry Compressed Air Supply 1 SCFM
@ 40 PSI
© 2020 Vision Engraving & Routing Systems