Download Print this page

Direct Connection To Computer - Vision Phoenix 1212 S5 Installation Manual

Hide thumbs Also See for Phoenix 1212 S5:

Machine Setup

Follow the steps from one of the two sections below to configure the IP address depending on the

connection type above.

3.1

Direct Connection to Computer

Direct connection to the computer or direct connection using a network hub or switch.

Once the machine is connected directly to the computer's network port or is connected directly to a

network hub or switch with the black Ethernet cable, power the machine on. The power switch for the

Phoenix 1212 is located on the left side of the machine. Once the machine has initialized, the home

screen will appear on the LCD screen.

Select the Settings Screen icon.

Table of Contents