Standard Web pages
5.7 Monitoring
5.7
Monitoring
You can open the inverter status monitoring Web page by selecting the monitoring icon from
either the home page or the navigation sidebar.
5.8
Diagnostics
You can open the diagnostics Web page by selecting the diagnostics icon from either the
home page or the navigation sidebar. This page includes the following three subpages:
● Faults/alarms
● I/O status
● Status bits
Meaning of fault/alarm icons
Fault and alarm icons are shown in the upper-right corner of the SINAMICS G120 Web
page. See the following example for possible icon display:
42
Fault icons
①
No active faults
②
Active faults (in this example: one active fault)
Alarm icons
③
No active alarms
④
Active alarms (in this example: two active alarms)
SINAMICS G120 Smart Access
Operating Instructions, 04/2018, A5E43332487