Siemens Sinamics G120 Operating Instructions Manual page 46

Standard Web pages
5.9 Backup and restore
Operating sequence
1.
2.
Note
When you perform the backup operation on a mobile device, if the menus and buttons on the
Web page disappear after you finish editing the backup file name, then you can tap in the
blank area of the Web page to restore them.
46
Proceed as follows to back up the parameter file to SINAMICS G120 Smart Access.
Character restrictions for the file name: maximum 30 characters which are limited to A-
Z, a-z, 0-9, _, -, (, ), dot, or space. If the name for the new backup file already exists, a
message prompts asking you whether you want to overwrite the existing file or cancel
the backup process.
The backup process completes when the following window appears. If the Web page
indicates that the backup fails, you can select to back up again.
Note that it is optional to download the backup file to your local drive (recommended on
PC).
SINAMICS G120 Smart Access
Operating Instructions, 04/2018, A5E43332487