Operations; Receiver Configuration; Antenna Configuration - KING One Pro KOP4800 Owner's Manual

Make sure your TV is on the correct input from your receiver.
If your receiver screen does not appear on your TV, check TV input by pressing Source/Input button
located on your TV or TV's remote.
Configure your receiver as follows:
Switch Type: Multi-switch
Make this one-time setting in the receiver's satellite setup menu.
DIRECTV uses mode 1. The KING One Pro comes factory preset for mode 1. If your antenna is
new, you will not need to configure it.
IF YOUR ANTENNA IS NEW, SKIP THIS STEP AND GO TO PAGE 10.
MODE SERVICE
DIRECTV
1
DISH
2 DISH
3 Bell TV
4 DISH
Page 8
OPERATION

RECEIVER CONFIGURATION

Dish Type: 3-LNB (18"x20") or 18x20" Triple-sat LNB

ANTENNA CONFIGURATION

SATELLITES
101, 119
DIRECTV subscribers
61.5, 110, 119, 129
DISH subscribers with Wally, ViP211z, 211k, 211 or 411 receivers
110, 119, 129 DISH subscribers with receivers not listed in MODE 1
82, 91
Bell TV subscribers
61.5, 110, 119
DISH subscribers with receivers not listed in MODE 1