Installing A Memory Module - Dell PowerEdge R230 Owner's Manual

Figure 24. Removing the memory module
1 memory module
3 memory module ejector (2)
Next steps
1 Install the memory module.
2 Install the cooling shroud.
Related links
Removing the cooling shroud

Installing a memory module

Installing the cooling shroud
Installing a memory module
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
3 Remove the cooling shroud.
WARNING: The memory modules are hot to touch for some time after the sistema has been powered down. Allow the memory
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or
metallic contacts on the memory module.
Steps
1 Locate the appropriate memory module socket.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory module or
metallic contacts.
70 Instalación y extracción de los componentes del sistema
2 memory module socket