Installing The Processor - Dell PowerEdge R230 Owner's Manual

Ilustración 64. Extracción e instalación de un procesador
1 indicador de la pata 1 del procesador
3 Ranura (2)
5 Palanca del socket
7 Socket
Siguientes pasos
1 Coloque el procesador.
2 Coloque el disipador de calor.
3 Siga el procedimiento que se describe en la sección Después de trabajar en el interior del sistema.
Vínculos relacionados
Removing the cooling shroud
Extracción del disipador de calor

Installing the processor

Instalación del disipador de calor
Installing the cooling shroud
Installing the processor
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified
service technicians.
2 Procesador
4 Protector del procesador
6 Salientes del socket (2)
Instalación y extracción de los componentes del sistema 113