Ilustración 18. Interior del sistema: sistemas con dos unidades de disco duro cableadas de 3.5 pulgadas
1
Módulo del panel de control
3
Interruptor de intrusiones
5
Soporte vertical para tarjetas de expansión
7
el procesador
9
Ventilador de refrigeración de relleno
11
la unidad óptica
Interruptor de intrusiones
Removing the intrusion switch
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1
Ensure that you follow the
2
Follow the procedure listed in
3
Keep the plastic scribe ready.
Steps
1
Disconnect the intrusion switch cable from the connector on the system board.
2
Using the plastic scribe, slide the intrusion switch out of the intrusion switch slot.
62
Instalación y extracción de los componentes del sistema
Instrucciones de
seguridad.
Antes de trabajar en el interior de su
2
Unidad de disco duro cableada
4
la unidad de fuente de alimentación
6
Módulo de memoria (A1, A2, A3, A4)
8
la placa base
10
Ventilador de refrigeración (3)
equipo.