Dell PowerEdge R230 Owner's Manual page 105

3 Align the expansion card bracket with the hooks on the chassis.
4 Insert the card connector into the expansion card riser connector until the card is firmly seated.
NOTE: Ensure that the expansion card is properly seated along the chassis, so that expansion card latch can be closed.
5 If required, connect the cables to the expansion card.
Figure 56. Installing the expansion card in the expansion card riser
1 touch point (2)
3 expansion card riser
Figure 57. Installing the expansion card in the expansion card riser
1 PERC card
2 expansion card riser connector
4 expansion card
2 expansion card connector on the riser
Instalación y extracción de los componentes del sistema 105