Installing The System Board - Dell PowerEdge R230 Owner's Manual

Figure 84. Removing the system board
1 touch point (2)
Next steps
1 Install the system board.
2 Follow the procedure listed in the After working inside your system section.
Related links
Removing the cooling shroud
Removing a memory module
Removing the expansion card riser
Removing the optional iDRAC port card
Extracción del disipador de calor
Extracción del procesador

Installing the system board

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures must be performed only by Dell certified
service technicians.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
2 system board
Instalación y extracción de los componentes del sistema 133