Plano Posterior De La Unidad De Disco Duro; Removing The Hard Drive Backplane - Dell PowerEdge R230 Owner's Manual

3 Mientras se inicia el sistema, pulse F2 para entrar en System Setup (Configuración del sistema) y asegúrese de que la batería esté
funcionando correctamente.
4 Introduzca la hora y la fecha correctas en los campos System Setup (Configuración del sistema) Time (Fecha) y Date (Hora).
5 Salga del programa de configuración del sistema.
Vínculos relacionados
Removing the expansion card riser
Installing the expansion card riser

Plano posterior de la unidad de disco duro

Los sistemas con cuatro unidades de disco duro SAS o SATA de intercambio activo de 3.5 pulgadas admiten un plano posterior de la unidad
de disco duro.

Removing the hard drive backplane

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
CAUTION: To prevent damage to the drives and backplane, you must remove the hard drives from the system before removing
the backplane.
CAUTION: You must note the number of each hard drive and temporarily label them before removal so that you can replace them
in the same locations.
1 Ensure that you follow the
2 Follow the procedure listed in
3 Remove all the hard drives.
4 Disconnect the SAS/SATA data, signal, and power cable(s) from the backplane.
Step
Press the release tabs and lift the hard drive backplane out of the chassis.
Instrucciones de seguridad.
Antes de trabajar en el interior de su equipo.
Instalación y extracción de los componentes del sistema 121