Optional Peripherals - ABB REC 523 Technical Reference Manual

REC 523
9.3.
80
Remote Monitoring and Control Unit
Technical Reference Manual
There are two separate software numbers to be specified in the order, one for the
protocol options as described in Table 9.2.-1 and the other for the function options
as described in Table 9.2.-2.
Table 9.2.-1 Protocol options
Software No
1MRS110006-001
1MRS110011-001
1MRS110012-001
Table 9.2.-2 Function options
Software No
1MRS100512
1MRS100513
1MRS100143

Optional peripherals

Table 9.3.-1 Peripheral devices
Parametrization cable
Cable between REC 523 and a commercial modem 1MRS 120528
Cable between MicroSCADA and REC 523
Bus connection module RER 103
Semi-flush mounting kit
Rack mounting kit
a. XX receiver / transmitter; B = plastic fibre cable; M = Glass fibre cable
Protocol options included
SPA, LON and IEC 60870-5-101
SPA, LON and DNP 3.0
SPA, LON and Modbus (both the RTU and ASCII modes)
Function options for REC 523
Current waveform distortion measurement
Voltage waveform distortion measurement
Power factor controller
1MRS750881-MUM
1MRS 120520
1MRS 120523
a
1MRS 090701-XX
1MRS 050239
1MRS 050242