About KD-DA2x4G/KD-DA2x8G
Key Digital's KD-DA2x4G and KD-DA2x8G are 18Gbps and HDCP2 .2 supporting HDMI Switcher + Distribution
Amplifier kits with HDBaseT output and 4/8 Rx units included . The KD-DA2x4G/KD-DA2x8G kit is designed
for applications such as Digital Signage and other professional AV installation types, where the selected HDMI
source is distributed to up to 4/8 displays . All connected displays show the same image at the same time .
The 4/8 KD-XDALRx HDBaseT Rx extenders are all powered via HDBaseT from the KD-DA2x4G/2x8G unit, and
support extension of resolutions up to UHD/4K up to 250 ft . (76m) using CAT5e/CAT6/CAT6A/CAT7 . 1080p
resolutions may be extended up to 328 ft . (100m) . KD-DA2x4G/KD-DA2x8G is easily integrated into professional
AV systems with the audio from the selected source being de-embedded on analog and digital audio connectors,
and switching controllable via TCP/IP, RS-232 or IR . KD-DA2x4G/KD-DA2x8G is Key Digital App ready and also
controllable by control systems such as Compass Control Pro . EDID handshaking is easily selected via front
panel rotary dial and all UHD/4K EDID handshake files include HDR header information .
Key Features
HDMI Switching & Distribution: 2 HDMI sources to 4/8 HDBaseT outputs
›
Power over HDBaseT: All included Rx units powered by the main unit
›
UHD/4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
›
Signal Extension: For resolution and cable quality
›
4K/UHD: Up to 250 ft . (76m) using CAT5e/CAT6/CAT6A/CAT7
»
1080p: Up to 328 ft . (100m) maximum
»
18 Gbps Bandwidth: High Speed / Performance for latest HDMI standards
›
High Dynamic Range (HDR) Format Support: HDR10 and Dolby
›
HDCP 2.2: Compliancy up to HDCP 2 .2 and backward compliant
›
Resolution Support: Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) up to
›
4096x2160p
Deep Color Support: Up to UHD/4K 60Hz 4:2:0/12 bits, 60Hz 4:2:2/12 bits
›
Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected
›
source via hot plug detection voltage when enabled
Audio De-embedder: Audio of the selected HDMI input is de-embedded at the Coax digital (PCM) and
›
Analog L/R balanced/unbalanced connectors
Control Pass-Thru: 4/8 three pin phoenix connectors for bi-directional IR or RS-232 for each HDBaseT
›
output . 4/8 IR sensors and IR emitters included .
Full Buffer System
™
›
& display, and EDID Control handshake
EDID: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID
›
data copied from an Output/Display 1
Lossless Compressed Digital Audio: Dolby
›
Dolby
Atmos
®
CEC Disconnect: Prevents all device communication signals via CEC, ARC, and HDMI Ethernet channels
›
Control: Front panel buttons/LEDs, Serial IR, Optical IR, RS-232 Control, and TCP/IP Control
›
Control System Support: Key Digital
›
ready, Compass Control
systems via open API .
: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source
®
app ready . Key Digital Management Software
®
Pro ready . Fully controllable by all IR, RS-232, and TCP/IP supported control
®
Vision
®
TrueHD, Dolby
Digital Plus, DTS-HD Master Audio
®
1
, and
™
Pro (KDMS
Pro)
™
™
Need help?
Do you have a question about the KD-DA2x8G and is the answer not in the manual?