Key Digital KD-DA2x4G Quick Setup Manual

READ PRIOR TO INSTALLATION
KD-DA2x4G / KD-DA2x8G
2x4/2x8 4K/18G POH/HDBT/HDMI Distribution Amplifier/
Switcher with Audio De-Embedding
(Includes KIT 4/8Rx 100 Meters Extenders)
QUICK SETUP GUIDE
Begin with the KD-DA2x4G/KD-DA2x8G unit and all input/output devices turned OFF.
1
1
1
2
2
2
3
3
3
3
3
3
5. Connect control system and/or PC to TCP/IP, RS-232, or place IR emitter
over IR sensor.
6. To control connected monitors, connect IR/RS-232 pass-thru wiring
from control system into pass-thru ports and from KD-XDALRx to controlling displays
7. Screw-in both power supplies to the KD-DA2x4G/KD-DA2x8G's unit, and then connect
power to outlets.
8. Power on HDMI sources and displays
CONNECT
1. Connect HDMI sources to the input ports of KD-DA2x4G/KD-DA2x8G unit
2. Connect HDMI displays to the output ports of KD-XDALRx units
3. Connect CAT wires from KD-DA2x4G/KD-DA2x8G's HDBaseT outputs to
KD-XDALRx HDBaseT input.
4. Connect analog or digital audio outputs to audio system
4
4
4
5
5
6
6 5
6
6 6
6
© 2018 Key Digital, Inc. All rights reserved.
7
7
7